Ceramic Fiber Module
6 products found
Ceramic Fiber Edge-Grain Folded Module 1260°C
Edge-grain folded ceramic fiber module rated 1260°C with superior spring-back effect and tight joint closure. Fiber layers perpendicular to hot face minimize cold face heat loss. Used in steel annealing furnaces, forge furnaces, and industrial kiln roofs.
λ = 0.20 W/(m·K) at 600°C
Ceramic Fiber Module 1260°C
Pre-compressed ceramic fiber module for fast furnace lining installation. Significantly reduces construction time vs traditional brick linings.
λ = 0.12 W/(m·K) at 600°C
Ceramic Fiber Module 1260°C 300mm Folded
Heavy-duty ceramic fiber folded module rated 1260°C, 300mm thick for superior insulation depth. Reduces cold face temperature and energy loss. Suited for boiler backup lining, tunnel kiln walls, and large industrial furnace roofs.
λ = 0.21 W/(m·K) at 600°C
Ceramic Fiber Veneered Module 1260°C Board Hot Face
Ceramic fiber module rated 1260°C with rigid ceramic fiber board hot face veneer. Smooth, erosion-resistant surface reduces fiber dusting and product contamination. Ideal for clean-atmosphere furnaces, pharmaceutical kilns, and electronics heat-treatment lines.
λ = 0.22 W/(m·K) at 600°C
HP Ceramic Fiber Module 1430°C High-Duty
HP-grade ceramic fiber module rated 1430°C, Al2O3 62%, bulk density 260 kg/m³. Withstands severe thermal cycling in petrochemical heaters, ethylene cracking furnaces, and high-duty steel ladle preheating stations.
λ = 0.25 W/(m·K) at 600°C
High-Purity Ceramic Fiber Module 1360°C
High-purity ceramic fiber module rated 1360°C, Al2O3 54%, bulk density 240 kg/m³. Low linear shrinkage ensures dimensional stability during furnace relining. Designed for glass lehrs, ceramic sintering kilns, and petrochemical reformer furnaces.
λ = 0.23 W/(m·K) at 600°C