Ceramic Fiber

1260°C Chopped Ceramic Fiber Bulk 1-3mm

1260°C chopped ceramic fiber 1-3mm for castable reinforcement and refractory plastic mix. Improves crack resistance in monolithic linings for steel ladles, tunnel kilns and aluminum melting furnaces.

λ = 0.20 W/(m·K) at 600°C

1260°C Milled Ceramic Fiber for Coating and Thermal Spray

1260°C milled ceramic fiber for coating additives and thermal spray. Fine uniform particle size enhances adhesion and insulation in refractory coatings on furnace shells, boiler tubes and steel structure fireproofing.

λ = 0.21 W/(m·K) at 600°C

1260°C Spun Ceramic Fiber Bulk for Textile and Sealing

1260°C spun ceramic fiber for textile manufacturing and high-temperature sealing. Long continuous filaments and high tensile strength suit ceramic yarn, woven tape and furnace door gasket fabrication.

λ = 0.19 W/(m·K) at 600°C

1430°C High-Purity Ceramic Fiber Bulk HP Grade

1430°C HP ceramic fiber bulk with elevated Al2O3 for extreme-temperature packing and stuffing. Superior refractoriness and low shrinkage suit EAF electrode port sealing, cracking furnace joints and cement kiln transition zones.

λ = 0.18 W/(m·K) at 600°C

// Ceramic Fiber1600°C

Alumina Fiber Blanket 1600°C

High purity alumina fiber blanket rated to 1600°C. Extremely low shrinkage at high temperatures. For the most demanding furnace applications.

λ = 0.25 W/(m·K) at 1000°C

Ceramic Fiber Blanket 1260°C

Standard ceramic fiber blanket for industrial furnace insulation. Lightweight, flexible, and easy to install. Temperature rating 1260°C.

λ = 0.12 W/(m·K) at 600°C

Ceramic Fiber Blanket 1260°C High Density 160 kg/m³

1260°C high-density ceramic fiber blanket at 160 kg/m³ for enhanced mechanical strength and gas erosion resistance. Ideal for boiler backup lining, petrochemical process heater modules, and forge furnace high-temperature zone insulation.

λ = 0.21 W/(m·K) at 600°C

// Ceramic Fiber1360°C

Ceramic Fiber Blanket 1360°C High Purity Grade

1360°C high-purity ceramic fiber blanket, Al2O3 47–52%. Superior temperature stability and low linear shrinkage. Designed for glass tank furnace crowns, non-ferrous metal melting furnaces, and ceramic shuttle kiln hot face insulation.

λ = 0.20 W/(m·K) at 600°C

Ceramic Fiber Blanket 1430°C (HP)

High purity alumina-silica ceramic fiber blanket rated to 1430°C. For extreme temperature industrial applications.

λ = 0.18 W/(m·K) at 800°C

Ceramic Fiber Blanket 1430°C Polycrystalline Al2O3 72%

1430°C polycrystalline ceramic fiber blanket, Al2O3 72%. Superior thermal stability and minimal shrinkage versus amorphous fiber. Ideal for hydrogen atmosphere furnaces, vacuum furnaces, and high-temperature ceramic sintering kilns.

λ = 0.26 W/(m·K) at 600°C

// Ceramic Fiber1600°C

Ceramic Fiber Blanket 1600°C Polycrystalline Mullite

1600°C polycrystalline mullite ceramic fiber blanket, Al2O3 72%. Near-zero creep and ultra-high temperature resistance. For semiconductor diffusion furnaces, ultra-high temperature sintering kilns, and aerospace thermal protection backup insulation.

λ = 0.30 W/(m·K) at 600°C

Ceramic Fiber Board 1260°C

Rigid ceramic fiber board with good mechanical strength. Used as furnace hot face or backup insulation where rigidity is required.

λ = 0.15 W/(m·K) at 600°C

Ceramic Fiber Bulk 1260°C

Loose bulk ceramic fiber wool for filling, packing, and expansion joints. Highly flexible and conformable to irregular shapes.

λ = 0.10 W/(m·K) at 600°C

Ceramic Fiber Edge-Grain Folded Module 1260°C

Edge-grain folded ceramic fiber module rated 1260°C with superior spring-back effect and tight joint closure. Fiber layers perpendicular to hot face minimize cold face heat loss. Used in steel annealing furnaces, forge furnaces, and industrial kiln roofs.

λ = 0.20 W/(m·K) at 600°C

Ceramic Fiber Module 1260°C

Pre-compressed ceramic fiber module for fast furnace lining installation. Significantly reduces construction time vs traditional brick linings.

λ = 0.12 W/(m·K) at 600°C

Ceramic Fiber Module 1260°C 300mm Folded

Heavy-duty ceramic fiber folded module rated 1260°C, 300mm thick for superior insulation depth. Reduces cold face temperature and energy loss. Suited for boiler backup lining, tunnel kiln walls, and large industrial furnace roofs.

λ = 0.21 W/(m·K) at 600°C

Ceramic Fiber Veneered Module 1260°C Board Hot Face

Ceramic fiber module rated 1260°C with rigid ceramic fiber board hot face veneer. Smooth, erosion-resistant surface reduces fiber dusting and product contamination. Ideal for clean-atmosphere furnaces, pharmaceutical kilns, and electronics heat-treatment lines.

λ = 0.22 W/(m·K) at 600°C

HP Ceramic Fiber Board 1430°C High Alumina

HP ceramic fiber board 1430°C with 62% Al2O3 withstands severe thermal cycling for petrochemical heaters, steam reformers, and hydrogen production furnaces requiring clean, halogen-free linings.

λ = 0.22 W/(m·K) at 600°C

HP Ceramic Fiber Module 1430°C High-Duty

HP-grade ceramic fiber module rated 1430°C, Al2O3 62%, bulk density 260 kg/m³. Withstands severe thermal cycling in petrochemical heaters, ethylene cracking furnaces, and high-duty steel ladle preheating stations.

λ = 0.25 W/(m·K) at 600°C

// Ceramic Fiber1500°C

High-Purity Alumina Fiber Al2O3 80% 1500°C

Al2O3 80% high-purity alumina fiber for 1500°C service; superior thermal stability and chemical resistance for petrochemical furnace linings, power station boilers, and cement rotary kiln insulation.

λ = 0.18 W/(m·K) at 800°C

// Ceramic Fiber1360°C

High-Purity Ceramic Fiber Board 1360°C

High-purity ceramic fiber board rated 1360°C with enhanced Al2O3 content delivers superior hot face performance for tunnel kilns, roller hearth furnaces, and ceramic industry sintering applications.

λ = 0.20 W/(m·K) at 600°C

// Ceramic Fiber1360°C

High-Purity Ceramic Fiber Module 1360°C

High-purity ceramic fiber module rated 1360°C, Al2O3 54%, bulk density 240 kg/m³. Low linear shrinkage ensures dimensional stability during furnace relining. Designed for glass lehrs, ceramic sintering kilns, and petrochemical reformer furnaces.

λ = 0.23 W/(m·K) at 600°C

High-Strength Ceramic Fiber Board 1260°C 450 kg/m³

High-strength ceramic fiber board 1260°C at 450 kg/m³ provides structural rigidity for load-bearing furnace components, door panels, and roof linings in heat treatment and forge furnaces.

λ = 0.23 W/(m·K) at 600°C