Microporous Panel
9 products found
METHERM Microporous M 1000 Max — High-Strength Grade
High-strength fumed silica microporous board with increased fibre loading (flexural 0.13 MPa) for vibration-exposed and mechanically loaded installations. Distributed by ThermalEast (METHERM brand).
λ = 0.021 W/(m·K) @ 20°C; 0.040 @ 800°C
METHERM Microporous M 1000 — Fumed Silica Insulation Board
Fumed silica microporous insulation board to 1000°C. Thermal conductivity 0.020 W/(m·K) at 20°C — below still air. Distributed by ThermalEast (METHERM brand).
λ = 0.020 W/(m·K) @ 20°C; 0.033 @ 800°C
METHERM Microporous M 1100 — Extended Temperature Grade
Extended-temperature fumed silica microporous board to 1100°C, with M 1000-equivalent λ (0.020 W/(m·K) at 20°C). Distributed by ThermalEast (METHERM brand).
λ = 0.020 W/(m·K) @ 20°C; 0.033 @ 800°C
Microporous Fire-Rated Panel 1000°C Passive Fire Protection
Fire-rated microporous insulation panel to 1000°C, 300 kg/m³ for passive fire protection in construction and offshore. Meets fire division standards for structural steel protection, fire doors, and cable tray barriers in petrochemical plants.
λ = 0.021 W/(m·K) at 200°C
Microporous Flexible Mat 800°C Curved Surface Grade
Flexible microporous insulation mat rated to 800°C, 200 kg/m³ for wrapping curved surfaces, pipes, and irregular geometries. Delivers 0.022 W/m·K conductivity across boiler drums, heat exchanger shells, and bent furnace wall sections.
λ = 0.022 W/(m·K) at 200°C
Microporous Insulation Panel
Fumed silica microporous insulation panel. Ultra-low thermal conductivity, the thinnest high-temperature insulation solution available.
λ = 0.022 W/(m·K) at 200°C
Microporous Insulation Panel 1200°C High-Temperature Grade
High-temperature microporous insulation panel rated to 1200°C for furnace door and backup lining duty. Combines low 0.024 W/m·K conductivity with 320 kg/m³ density, serving steel reheating furnaces, blast furnace hot blast mains, and glass tank linings.
λ = 0.024 W/(m·K) at 200°C
Microporous Insulation Panel 900°C Fumed Silica
Fumed silica microporous insulation panel rated to 900°C, 260 kg/m³. Ultra-low thermal conductivity enables thin-profile designs for space-constrained tunnel kiln cars, industrial ovens, and ceramic kiln backup linings.
λ = 0.019 W/(m·K) at 200°C
Microporous Wired Mat 1000°C Pipe and Vessel Wrap
Wired microporous insulation mat rated to 1000°C, reinforced with stainless steel wire mesh for pipe and vessel wrap applications. Delivers 0.023 W/m·K conductivity on steam pipelines, reformer tubes, and ethylene cracker process piping.
λ = 0.023 W/(m·K) at 200°C